Melting Pot?

[spot tail hunter]

Anybody know the cheapest place to get a lead melting pot. I am about to get started on making some sinkers. Thanks

[Jesse Lockowitz]

check cabelas .they have a pretty good selection and the prices dont seem bad.plus they do shipping on dollar amount not weight i think. so if u get a heavy arse pot, shipping aint bad :D


Jesse

[SALTSHAKER]

You could also try Hilts Molds site, they have the electric melting pots and several molds etc for sinkers and jig heads.... salt

[barty b]

Really small iron skillet and a blow torch

[Shooter]

Yup thats what we use is that Dutch oven over a turkey fryer propane burner and if your doing dirty lead make sure you do it outside cause them fumes will take your breath away.

[Jesse Lockowitz]

we use a Dutch oven and if your dirty make sure you do it outside cause them fumes will take your breath away.

:eek::eek::p

haha

[rgking03]

Are you using gas or electric? I recommend getting an electric unless you're making really big sinkers. I use a Lee production pot that I got on EBay for the pouring of sinkers, but I use a cast iron Dutch oven for melting down the lead from wheel weights to ingots. I got that from Harbor Freight.

Aww Harbor Freight I love that place!!! I use a 20lb melting pot from Do-It Molds...Electric and I use a 2.5" dip out ladle.. Pours anything I need..

[texas sharker]

check out craigslist in your locale under "plumbing supplies".

i've also found REALLY nice ones used but CHEAP at gun shows.

GOOD LUCK on the water, ts

[Digger]

Really small iron skillet and a blow torch

7 bucks at Walmart. And a hot plate work with very heavy gloves (welders would be ideal)

[junkmansj]

I use a dutch oven and the Turkey fryer Burner, and always work outside. Last session was 210 Lbs cast

[OldCrab]

http://www.barlowstackle.com/lead-melting-pots.html