eels???

[ymmij]

what do yall think is the best way to rig live eels from the surf for stripers. use them from a boat all the time. just trying to find a better way from the beach. thanks.........

[basstardo]

I have only done this a few times, but the way that has worked best for me is to use a regular fishfinder rig with a circle hook, using about a 6"-8" leader for the hook. I put the into the eels mouth and out one of the gill plates. It's worked pretty well for keeping them untangled, but they still tangle up on occasion. I've tried hooking them through the tail and for whatever reason it just turns into a balled up mess before I can even cast it sometimes.

[justinfisch01]

Now this might not be what you are looking for but when I throw eels its from a jetty. I use 30lb braid to a swivel then a piece of 50lb mono leader about 30 inches long. to a 6/0 live bait hook usually a gami. hook the eel from under the chin and out one of the eyes. The will naturally swim to the bottom you just lift the rod to get them moving again with the current. But I always ice them before using so you can handle them. they come right back alive when they hit the water. If you need a little more weight, after you ice them shove a 1 oz inline sinker in its mouth and then hook it.

[Catfish713]

both of these sound spot on, those rigs should get you in the right direction for some nice stripes

[RuddeDogg]

36 inch leader with 5/0-6/0 circle hook, Owner or Gammi to a 3 oz in-line or crescent sinker tied right to your line. Hook the eel through th elips like ya do a minnow and toss em out and hold on!!!!!!!!!!!!!!!!!

[The_Outlaw]

This is for rigging rubber eels.

http://www.youtube.com/watch?v=nTJmAlXzBeQ Part 1

http://www.youtube.com/watch?v=cmMoGpwadoY Part 2

Hope this helps.

[The_Outlaw]

Here is an overall look at striper fishing with eels from caring for your bait to fishing techniques.


These pieces of "striper candy" can be difficult to handle at times. If you've kept them in the cooler, they will be easier to handle because the ice pack slows them down. The best way to handle eels that I have found is to cut up an old burlap bag into rags. This course material lets you get a good grip on the "snake". If you can't find burlap, old cotton socks will do. You grab the eel by the back of the "neck" and grip tightly. Remember, eels can't hurt you but sometimes they will try to wrap themselves around your wrist and get you a little slimed up.

Your terminal tackle should consist of a hook, a monofilament leader and a swivel. The hook should have a short shank and have a bronze or black finish. Stay away from the nickel or gold finish hooks as they are more apt to be seen by a wary striper. Depending on the size of the eel, I use a 4/0 to 6/0 Mustad 94150 or Mustad 9174 (Gamakatsu Octopus #0241_). Some guys swear by the circle hooks but I have to admit, I haven't tried them yet. Now that they come in a black finish, I'll have to give them a try (Gamakatsu Octopus Circle #20841_). For leader material, 3 feet of 40 to 60 pound test monofilament is preferred. I like to use heavier leaders when fishing rocky areas due to the striper's penchant for diving into rocks. Attach a 90/100 pound test black barrel swivel to the end of the leader and that completes your terminal tackle.

Now it's time to start fishing. There are several methods of hooking an eel. One method is to run the point of the hook through one eye and out the other. This way you have the support of the skull when you cast your eel. Another method is to place the point of the hook into the eel's mouth and bring it out through one of the eyes. My personal favorite method of hooking an eel is to place the point of the hook as deeply into the eel's mouth as possible and bring it out through the bottom of the throat. The disadvantage of this is that the soft tissue tears more easily and you might loose a few more eels when casting, but not a significant number. The advantage is that the eel will stay lively longer and you can hide more of the hook shank in the eel's mouth so as to be less noticeable to your prey.

After you cast your eel seaward, hold your rod tip in the 12:00 o'clock position and reel in slowly. When a bass strikes your eel, there are two schools of thought as to what to do next.


One way to proceed is to drop your rod tip so it's parallel with the water and set the hook when the line tightens.
The other school of thought is to drop your rod tip like before but as you drop your rod, open your bail, or throw the clutch if you're using conventional gear, and count to 10 while you let the fish run. You'll want to close your bail or engage your gears, but not without slack in your line because the fish might feel the tension and drop your offering. To get that needed slack, you slowly raise your rod tip while the fish is running, then drop it again. Engage your line pick up and keep you rod tip low until the line tightens, then set the hook. This gives the fish a chance to take the bait and gives you a better chance for a hook up. Unfortunately, this often means you'll hook the fish deeper and could do damage to a fish you intend to release.


If you find yourself with leftover eels at the end of your trip, they are not difficult to keep alive for your next trip. The easiest way to keep your eels alive is to get a 5 or 10 gallon aquarium with an aerator. Try to keep the aquarium in a cool part of the house because if the water gets too warm, the eels won't survive. I keep the eels in the mesh bag and dunk the whole thing in the aquarium. This saves me the trouble of having to scoop net them. If you don't keep them in a mesh bag, put some sort of covering over the aquarium as the eels can escape.

Another way to keep your eels alive is to use what I call the "three bucket system". This consists of three 5 gallon buckets, two of which have drain holes in the bottom, damp seaweed or rags, and ice. You place the eels with the damp seaweed or rags in a bucket with drain holes and place that bucket inside the bucket without drain holes. Then, you place the second bucket with drain holes over the bucket with the eels and place ice cubes in it. This set up allows the ice to melt and drip onto the eels to keep them moist and it lets any excess water and slime to drain off of the eels and into the bottom bucket. They will stay alive and healthy as long as you keep them moist. This method is a little more labor intensive because you'll have to add ice and drain the bottom bucket a couple of times a day

[The_Outlaw]

P.S. I copy and pasted the above thread. I am not the author. :cool:

[ymmij]

thanks guys, between all of you i got some really good information. Saturday i will be putting some of this info, i got from yall to good use. thanks again. jimmy....

[RuddeDogg]

Let us know how ya make out.